will happen to all the fishermen to find a broken link in the barrel, if the frame is to break the ring, not There is nothing to be done, it leads to a skilled craftsman, especially if the barrel is recent and if we get it back like new, and we repair. But if we do not care to have the tie perfectly equal to the other, the barrel is old, we do repairs, you must cut the ties, remove all traces of paint and very little hot glue to paste a link in the right position again. Let us then a good binding that then spread generously with transparent epoxy resin with two components, possibly masking tape paper parts that do not want to mess. The difficult part lies in the layer of resin to dry without running, and the only is to keep the rod horizontal and rotate it slowly until the resin is hardened, ie aged 5 to 10 minutes.
If a break is just the ring of hard rock inside, those in SIC, you can easily replace only the one having the advantage of making us a completely invisible repair.
Simply measure the inside diameter the size of the frame and get a new ring that has the ring of stone of the same diameter, cut with a cutter to be able to remove the frame, scrape the outside to remove any traces of glue , position on the frame of our barrel making sure it is the right size (it should remain in place without glue) and then paste it with a drop of cyanoacrylate.
images intended to illustrate to those who want to try, the method for making a good tie.
0 comments:
Post a Comment